Picture

•Perform this operation while projecting the picture for which the adjustment/setting will be made.

•Select the menu name “Picture”.

See “Menu Operation Method” on Page E-33 for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-38.

Brightness / Contrast / Color / Tint / Sharpness

Picture qualities such as brightness and contrast will change depending on the whether the room is bright or dark. Please adjust to suit your preference.

Select the desired item name and then adjust with the SELECT ￿￿ buttons.

Item Name

SELECT  Button

SELECT  Button

Brightness

Darker

Brighter

Contrast

Less contrast

More contrast

Color

Less dense color

Denser color

Tint

More red

More green

Sharpness

Softer image

Sharper image

 

 

 

Note:

* The adjustment values of the adjustable items are stored according to input source. * “Tint” can be adjusted only at the time of NTSC composite/S signal input.

Picture Adj. / Fine Picture / H Position / V Position

Usually, automatic adjustment is performed at the time of signal selec- tion, but when automatic adjustment is not effective, these adjustments can be performed.

Note

When the image extends beyond the boundaries of the screen or is smaller than the screen, check that the “View” → “Aspect” setting is set to “Auto”. See “Aspect” on Page E-44.

Picture Adj. (Picture Adjustment)

Adjust this when bright and dark vertical bands appear on the screen.

Select the “Picture Adj.” item name and adjust with the SELECT ￿￿ buttons so that the vertical bands disappear and brightness becomes uniform across the screen.

E-40