Using the PC Card Viewer

PC Card Viewer Operation

This description reflects the PC Card Viewer settings as they were at the time of shipping from the factory.

Preparation: Insert the CompactFlash Card into the card slot of the projector. See Page E- 63.

1. Switch the Input to the PC Card

Remote control operation: Press the PC-CARD button.

Projector operation:

Press the SOURCE button a number of times

 

and set to PC-CARD.

The PC CARD indicator of the projector will light and the list in the PC Card will be displayed.

•When [PC Card Viewer] → [Initial Settings] of the menu is set to “Full

screen display,” the slides will be projected. Also, when [PC Card Viewer] → [Play mode] of the menu is set to “Automatic,” automatic play will commence from the first slide in the first folder. See Page E-51 for infor- mation about the settings.

When “PC Card Error” is displayed,

the CompactFlash Card that you are using cannot be properly identified.

•Insertion of the CompactFlash Card might be incomplete or it could possibly be damaged.

•The CompactFlash Card might not be of the CFA specification.

•Please try with a different CompactFlash Card.

Note:

*When the slide is contained in a folder, the folder icon will be displayed.

*Slides that cannot be displayed with this projector will be indicated by theicon display.

*Slides comprising a large amount of data will take time until the thumbnail is displayed. Setting [PC Card Viewer] → [Progress Bar] of the menu to “On” will display a guideline for the wait time. See Page E-52.

*A press of the Menu button during PC Card Viewer operation will display the tool bar. One more press will close the tool bar display.

*When displaying menu screen of the projector, select the settings icon of the tool bar. (Page E-62)

ON STANDBY OFF

FREEZE

MUTE

LAMP MODE

PC PC-CARD

VIDEO S-VIDEO

F O L D E R _ 1

1 / 3

Thumbnail

E-64