Mitsubishi Electronics XD70U 1, 2, 3

E-23

Power Cable Connections and Switching the Power On/Off

Finishing

1Switch off the power of the connected equip-

ment

2Switch off the power of the projector

Press the STANDBY button.

The [Power Off] display appears.

When the level gauge reaches maximum, the projection screen

will go off (in about 5 seconds) and the projector will enter the

power-off operation.

Note

* The operation can be cancelled by pressing a button other than

the STANDBY button.

* One more press of the STANDBY button will switch off the power.

Flashing amber

(Approximately 90

seconds)

Lit amber

Standby mode

The STANDBY indicator changes to flashing amber and lights a

steady amber after about 90 seconds (when the unit enters the

standby mode).

3Unplug the power cable

Check that the STANDBY indicator is lit in amber and then

unplug the power cable.

The STANDBY indicator will go off when the power cable is un-

plugged.

Warrning

Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp

or damage the projector.

Power Off

OK

?

STANDBY

STATUS

STANDBY

STATUS

STANDBY

STATUS

Lit green

STANDBY

(button on main unit)

LASER

AUTO

RGB VIDEO

QUICKMENU

Q

STANDBY

Contents

Main IMPORTANT XD70 DATA PROJECTOR XD70U User Manual IMPORTANT SAFETY INFORMATION E-2 IMPORTANT SAFETY INFORMATION CAUTION E-3 E-4 WARNING: Major Features E-6 Table of Contents E-7 Table of Contents E-8 Checking the Supplied Accessories E-9 Checking the Supplied Accessories E-10 Names of the Main Unit Parts E-11 Names of the Main Unit Parts Built-in Security Slot E-12 Names of the Remote Control Parts/Preparing the Remote Control Inserting the Batteries 1 2 3 Remote Control Range The range of operation differs according to the usage environment. Names of the Remote Control Parts/Preparing the Remote Control Page E-15 Placement Guide Screen Size and Projection Distance E-16 Connecting Personal Computers and Video Equipment Connections with Personal Computer Connect the projectors RGB connector using the included RGB signal cable. E-17 To Output the External Output Signal of a Notebook Computer 1 2 E-18 Connections with Composite Signals Video Equipment with VIDEO Connectors Video Equipment with S-VIDEO Connectors E-19 Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector E-20 Connections with the AUDIO Jack E-21 Power Cable Connections and Switching the Power On/Off Operating 1 2 The projector is now capable of regular projection. 1 Cursor 2 This will set the language and [Menu Language Select] will close. This completes the selection of the display language. 1 ment 2 3 E-24 Adjustment of the Projection Screen Adjustment of the Projection Screen 2 Turn the zoom ring to adjust the screen size of the projection image. 1 XD70 E-25 Adjustment of the Projection Screen (1) (1) (2) General Operation Input Selection Automatic Adjustment E-27 Selection of Aspect Ratio buttons on the remote control will permit movement of the display position. E-28 Freezing a Moving Picture Cancelling Video and Audio Temporarily Adjustment of the Volume E-29 Enlargement of the Image and Video Movement The degree of enlargement will differ depending on the signal. The image can also be moved in the following circumstances. After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to 0. E-30 Using the Presentation Timer E-31 Using the Laser Pointer CAUTION E-32 Performing Mouse Operations on the Computer with the Remote Control Unit E-33 Controlling the Projector from a Computer E-34 Protecting the Projector with the Security Lock E-35 E-36 Using the Quick Menu Content of Adjustments and Settings E-37 Menu Operation Method Names and functions of remote control unit buttons used for menu operations E-38 Menu Screen Names and Functions E-39 Performing Menu Operations 1 Menu Display 2 Selection of the Menu Name 3 E-40 Displaying the Cursor 5 4 6 E-41 Closing the Menu Q Q List of Item Names Offering Input Selection and Adjustments/Settings E-43 E-44 Image Brightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V Position Picture Adj. (Picture Adjustment) Reset E-46 Color Gamma Quick Color Adj. E-47 Color Space Color Color Temp. White E-48 White Balance E-49 View Aspect Filter E-50 Vertical Flip/Horizontal Flip XD70 Keystone E-51 Setup Auto Source Auto Power Off E-52 Lamp Mode Frequent switching this mode can degrade the lamp. Setup Menu Position E-53 Presentation Timer Setup Input Format E-54 Language Option E-55 Startup Screen When Logo is selected at the startup screen, the PROJECTOR XD70 logo is displayed. Option Security Lock E-56 Info. Status Factory Default Lamp Timer Reset E-57 Resolution / Frequency Lamp Timer E-58 When an Indicator is Lit or Flashing Thermal Protector E-59 Troubleshooting Check the following matters before requesting servicing. E-60 Cleaning Cleaning a Soiled Projector Main Unit Dirty Lens Dust of the Intake and Outflow Holes Cleaning the Inside of the Projector Replacing the Lamp Cartridge CAUTION Page E-63 Replacing the Lamp Cartridge 5 6 7 E-64 Specifications Optical Electrical Mechanical E-65 Table of Supported Frequency E-66 Cabinet Dimensions