Mitsubishi Electronics XD70U XD70

E-50

Vertical Flip/Horizontal Flip

In selecting the method of projecting to the screen, these functions are

set when the projector is in a suspended or a rear screen installation.

Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting

contents with the SELECT 왗왘 buttons.

View

“Vertical Flip” Off

“Horizontal Flip” Off

“Vertical Flip” Off

“Horizontal Flip” On

“Vertical Flip” On

“Horizontal Flip” On

“Vertical Flip” On

“Horizontal Flip” Off

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

XD70

Press the “왗” button. Press the “왘” button.

Keystone

Keystone distortion will occur when the projector and screen are on an

angle (in the vertical orientation). This function is used to correct this

distortion.

Select the item name “Keystone” and correct the keystone distortion using the

SELECT 왗왘 buttons.

Note:

* The menus and other on-screen displays cannot be adjusted.

* Please note that depending on the projected picture and the projection condi-

tions, it may not be possible to eliminate keystone distortion completely.

This function is used to save the keystone adjustment values.

Setting Keystone Save to on will set the previous keystone adjustment values

when projecting after the power cable has been disconnected and then recon-

nected.

Select the item name “Keystone Save” and set with the SELECT 왗왘 buttons.

Off .............. The keystone adjustment values return to the initial values when the power

cable is unplugged.

On............... The keystone adjustment values are retained in storage even when the

power cable has been unplugged.

Note:

Regardless of whether Keystone Save is set to “On” or “Off”, when projection is

from the standby condition, the picture is projected using the previous keystone

adjustment values.

Keystone Save

Contents

Main IMPORTANT XD70 DATA PROJECTOR XD70U User Manual IMPORTANT SAFETY INFORMATION E-2 IMPORTANT SAFETY INFORMATION CAUTION E-3 E-4 WARNING: Major Features E-6 Table of Contents E-7 Table of Contents E-8 Checking the Supplied Accessories E-9 Checking the Supplied Accessories E-10 Names of the Main Unit Parts E-11 Names of the Main Unit Parts Built-in Security Slot E-12 Names of the Remote Control Parts/Preparing the Remote Control Inserting the Batteries 1 2 3 Remote Control Range The range of operation differs according to the usage environment. Names of the Remote Control Parts/Preparing the Remote Control Page E-15 Placement Guide Screen Size and Projection Distance E-16 Connecting Personal Computers and Video Equipment Connections with Personal Computer Connect the projectors RGB connector using the included RGB signal cable. E-17 To Output the External Output Signal of a Notebook Computer 1 2 E-18 Connections with Composite Signals Video Equipment with VIDEO Connectors Video Equipment with S-VIDEO Connectors E-19 Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector E-20 Connections with the AUDIO Jack E-21 Power Cable Connections and Switching the Power On/Off Operating 1 2 The projector is now capable of regular projection. 1 Cursor 2 This will set the language and [Menu Language Select] will close. This completes the selection of the display language. 1 ment 2 3 E-24 Adjustment of the Projection Screen Adjustment of the Projection Screen 2 Turn the zoom ring to adjust the screen size of the projection image. 1 XD70 E-25 Adjustment of the Projection Screen (1) (1) (2) General Operation Input Selection Automatic Adjustment E-27 Selection of Aspect Ratio buttons on the remote control will permit movement of the display position. E-28 Freezing a Moving Picture Cancelling Video and Audio Temporarily Adjustment of the Volume E-29 Enlargement of the Image and Video Movement The degree of enlargement will differ depending on the signal. The image can also be moved in the following circumstances. After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to 0. E-30 Using the Presentation Timer E-31 Using the Laser Pointer CAUTION E-32 Performing Mouse Operations on the Computer with the Remote Control Unit E-33 Controlling the Projector from a Computer E-34 Protecting the Projector with the Security Lock E-35 E-36 Using the Quick Menu Content of Adjustments and Settings E-37 Menu Operation Method Names and functions of remote control unit buttons used for menu operations E-38 Menu Screen Names and Functions E-39 Performing Menu Operations 1 Menu Display 2 Selection of the Menu Name 3 E-40 Displaying the Cursor 5 4 6 E-41 Closing the Menu Q Q List of Item Names Offering Input Selection and Adjustments/Settings E-43 E-44 Image Brightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V Position Picture Adj. (Picture Adjustment) Reset E-46 Color Gamma Quick Color Adj. E-47 Color Space Color Color Temp. White E-48 White Balance E-49 View Aspect Filter E-50 Vertical Flip/Horizontal Flip XD70 Keystone E-51 Setup Auto Source Auto Power Off E-52 Lamp Mode Frequent switching this mode can degrade the lamp. Setup Menu Position E-53 Presentation Timer Setup Input Format E-54 Language Option E-55 Startup Screen When Logo is selected at the startup screen, the PROJECTOR XD70 logo is displayed. Option Security Lock E-56 Info. Status Factory Default Lamp Timer Reset E-57 Resolution / Frequency Lamp Timer E-58 When an Indicator is Lit or Flashing Thermal Protector E-59 Troubleshooting Check the following matters before requesting servicing. E-60 Cleaning Cleaning a Soiled Projector Main Unit Dirty Lens Dust of the Intake and Outflow Holes Cleaning the Inside of the Projector Replacing the Lamp Cartridge CAUTION Page E-63 Replacing the Lamp Cartridge 5 6 7 E-64 Specifications Optical Electrical Mechanical E-65 Table of Supported Frequency E-66 Cabinet Dimensions