Safety Precautions
1Safety Precautions
Both the installer and the owner and/or operator of the operator terminal must read and understand this installation manual.
1.1 UL Installation
Power, input and output (I/O) wiring must be in accordance with Class 1, Division 2 wiring methods (Article
1.2 General
–Only qualified personnel may install or operate the operator terminal.
–The operator terminal must be installed according to the installation instructions.
–The operator terminal is designed for stationary installation on a plane surface, where the following conditions are fulfilled:
•no high explosive risks
•no strong magnetic fields
•no direct sunlight
•no large, sudden temperature changes
–Never allow fluids, metal filings or wiring debris to enter any openings in the operator terminal. This may cause fire or electrical shock.
–The operator terminal fulfills the requirements of article 4 of EMC directive 89/336/EEC.
–Storing the operator terminal where the temperature is lower/higher than recommended in this manual can cause the LCD display liquid to congeal/become isotopic.
–The LCD display liquid contains a powerful irritant. In case of skin contact, wash immediately with plenty of water. In case of eye contact, hold the eye open, flush with plenty of water and get medical attention.
–The supplier is not responsible for modified, altered or reconstructed equipment.
–Use only parts and accessories manufactured according to specifications of the supplier.
–Peripheral equipment must be appropriate for the application and location.
–The figures in this manual serves an illustrative purpose. Because of the many variables associated with any particular installation, the supplier cannot assume responsibility for actual use based on the figures.
–The supplier neither guarantees that the operator terminal is suitable for your particular application, nor assumes responsibility for your product design, installation or operation.
1.3 During Use
–Keep the operator terminal clean.
–Emergency stop and other safety functions may not be controlled from the operator terminal.
–Do not use too much force or sharp objects when touching the keys, display etc.
Mitsubishi Electric, MA00776 |