Installation
2Installation
2.1 Space Requirements
–Installation plate thickness: 1.5 - 9.0 mm (0.06 - 0.35 inch)
–Space requirements when installing the operator terminal:
100mm
(4.0 inch)
177 mm |
|
|
(6.97 inch) |
| 100 mm |
|
| |
|
| (4.0 inch) |
50 mm |
| 50 mm |
(2.0 inch) |
| (2.0 inch) |
| 100 mm |
|
| (4.0 inch) |
|
|
| 56 mm |
| 285 mm | (2.20 inch) |
|
| |
| (11.22 inch) |
|
Caution
The openings on the enclosure are for air convection. Do not cover these openings.
2.2 Installation Process
1. Unpack and check the delivery. If damage is found, notify the supplier.
Panel cut out 245.5 x 138.5 mm (9.67 x 5.45 inch)
x 6
Note:
Place the operator terminal on a stable surface during installation.
Dropping it or letting it fall may cause damage.
2.Place the panel cut out where the operator terminal is to be situated, draw along the outer sides of the holes and cut according to the markings. If access to the text strip is needed, add extra space in the lower left corner.
For text strip
5.0 mm
18.0 mm | (0.20 inch) |
|
(0.71 inch)
Mitsubishi Electric, MA00776 |