MK Sound LCD-25, LCD-35 operation manual Optimizing Speaker Placement

Models: LCD-35 LCD-25

1 16
Download 16 pages 22.52 Kb
Page 4
Image 4
FIGURE 1

SATELLITE SPEAKER

FIGURE 1

+

SATELLITE SPEAKERS

 

+

 

+

 

 

RIGHT

 

LEFT

+

AMPLIFIER OR RECEIVER

HOOKUP

For each speaker, connect the Positive (+) lead from your amplifier or receiver to the RED (+) INPUT terminal and connect the Negative (-) lead from your amplifier or receiver to the BLACK (-) INPUT terminal. See Figure 1.

4. OPTIMIZING SPEAKER PLACEMENT

The sound quality produced by your speakers can be significantly enhanced by careful attention to their placement. While we understand that you may not redesign your room to accommodate your speakers, coming as close as possible to the ideal placement will give you much better sound.

The left and right channel speakers can be oriented either horizontally or vertically. The center channel speaker is designed for horizontal orientation (tweeter and woofer drivers next to each other), and may be angled (vertically) towards your listening position.

Three factors are important in getting the best sound. They are:

A.Height (or angle).

B.Location away from room walls or reflecting surfaces.

C.Separation between Left and Right speakers.

A. HEIGHT (OR ANGLE)

Your M&K speakers will always deliver sound superior to conventional speakers, regardless of where you locate them. However, because they are designed for very fast and accurate transient response, they achieve even better sound quality, and the flattest frequency response when properly oriented relative to your ear.

Ideally, the tweeters should be at the same height from the floor as your ears, when you are sitting in your main listening position.

If you have the speakers mounted above or below this height, they sound their best when you angle the speakers so that the speakers are aimed at your ears when you are in the main listening position.

4

Page 4
Image 4
MK Sound LCD-25, LCD-35 operation manual Optimizing Speaker Placement