MK Sound MX-SERIES, MX-150THX, V-125THX operation manual Table of Contents, Wiring Diagrams

	THX subwoofers	page 2
	TABLE OF CONTENTS
1.	SAFETY INSTRUCTIONS	3
2.	INTRODUCTION	4
3.	WHERE TO PLACE YOUR SUBWOOFER	4
4.	OPERATION WITH THX COMPONENTS	4
	CONNECTING THE SUBWOOFER TO A THX CONTROLLER	4
	TESTING THE SUBWOOFER (THX)	6
5.	CALIBRATING THE SUBWOOFER (THX)	6
	OPERATION OF THE "LOW PASS FILTER" AND "BASS LEVEL" SWITCHES	6
	SETTING SUBWOOFER LEVEL (THX)	7
	USING TWO SUBWOOFERS (THX)	7
6.	OPERATION WITH A NON-THX CONTROLLER	7
	OPERATION OF THE "LOW PASS FILTER" SWITCH	7
	OPERATION OF THE THE "BASS LEVEL" SWITCH	8
	WIRING WITH A NON-THX CONTROLLER	8
	USING THE SUBWOOFER WITH THE M&K LP-1S, HP-80 OR VF-80 HIGH-PASS FILTERS	10
	TESTING THE SUBWOOFER (NON-THX)	10
	SETTING SUBWOOFER LEVEL (NON-THX)	11
	USING TWO SUBWOOFERS (NON-THX)	11
7.	SATELLITE/SUBWOOFER PHASING TEST	11
8.	FINE-TUNING THE PLACEMENT OF YOUR SUBWOOFER	12
	SPECIAL METHOD FOR PLACING THE SUBWOOFER	13
9.	USE OF SPIKED FEET WITH "MX" SUBWOOFERS	14
10.	TROUBLESHOOTING	14
	IF YOU NEED TO REPLACE THE EXTERNAL FUSE	15
11. IF YOU NEED SERVICE		16
12.	SPECIFICATIONS	16
13.	CABINET MAINTENANCE	16
	WIRING DIAGRAMS
FIGURE 1 ONE SUBWOOFER TO A THX CONTROLLER		5
FIGURE 2 TWO SUBWOOFERS TO A THX CONTROLLER		5
FIGURE 3 ONE SUBWOOFER TO A SURROUND CONTROLLER (NON-THX)		8
FIGURE 4 TWO SUBWOOFERS TO A SURROUND CONTROLLER (NON-THX)		8
FIGURE 5 ONE SUBWOOFER TO AN AMP OR PREAMP (NON-THX)		9
FIGURE 6 TWO SUBWOOFERS TO AN AMP OR PREAMP (NON-THX)		9