powered subwoofers

page 14

producing a "boomy" sound if it is located in a corner. Always try the subwoofer first in a corner. If it sounds "boomy," move it a few feet out of the corner.

2.While your Subwoofer performs perfectly well directly on the floor, the distortion cancellation of its push-pull design and its frequency response are best when the Subwoofer is slightly elevated. We therefore strongly recommend that you use the enclosed feet to raise the Subwoofer off the floor.

3.Read Section 6, (page 11) Use of the Filter Control, carefully. The setting of this control is more critical with your MX model Subwoofer. With these models it is more likely that you will find the optimum setting to be below the 85 Hz recommended for other models.

MX-70:

The MX-70 gives a very high level of performance in a compact cabinet. Therefore, it is likely to be installed in both vertical and horizontal locations. To avoid having its inverted driver exposed in installations where the cabinet is horizontal, the MX-70 has two speaker grills.

If you locate the MX-70 with the inverted driver firing down towards the floor, leaving the grille on will not affect sound quality. Instead, if you want to save the grille, you can remove and store it. In its place, use the four black caps provided with your MX-70. These caps fit over the grille pegs on the cabinet "bottom" (where the inverted driver is located). Just snap these in place to use them as feet.

MX-1000 & MX-1000cc:

The MX-1000 and MX-1000cc Subwoofers are specially shielded for use with large-screen direct- view monitor television sets.

Take special care when installing your MX-1000 or MX-1000cc. Like most all "shielded" speakers, a magnetic lobe exists, directly in front .of each driver (to the left and right sides of the pedestal). Your set should not be exposed to this lobe. Therefore:

1.Do not mount the television on the MX-1000 or MX-1000cc from the side. Place it on the pedestal from the front or the back only.

2.The television must face forward on the pedestal, perpendicular to the speaker drivers. Do not mount the set so that it faces sideways.

11. TROUBLESHOOTING

Your M&K Subwoofer amplifier circuit provides high reliability, and, if necessary, easy modular replacement of parts. This guide will help you to solve or diagnose most problems that can occur with your Subwoofer. In the event that a fuse blows, you must replace it with a fuse of the correct value to avoid a fire hazard and to maintain your warranty protection.

1.

If your Subwoofer has no output:

 

a.

Make sure that the Subwoofer is plugged into an AC outlet.

 

b.

Check the "BASS LEVEL" control and make sure that it is set above the

 

 

"MIN" position. Rotate it clockwise if it is set to the "MIN" position.

Page 13 Page 15
Page 14
Image 14
MK Sound VX-4, V-90, V-2B, V-1B, MX-90, MX-80, V-100, MX-2000, MX-1000cc, V-3B, VX-7 operation manual Troubleshooting, MX-70
Page 13 Page 15

V-90, MX-70, MX-80, MX-1000, MX-2000 specifications

MK Sound is renowned for its high-performance audio products, consistently pushing the boundaries of sound technology. Among its acclaimed lineup are the VX-4, VX-7, V-1B, V-2B, and MX-100, each designed to deliver an extraordinary audio experience.

The MK Sound VX-4 is a compact yet powerful speaker that excels in various listening environments. It features a 4-inch woofer and a 1-inch tweeter, providing a broad frequency response that captures both the subtle details and the impactful lows of any audio track. The speaker’s design incorporates advanced construction techniques to minimize distortion, ensuring that every note is rendered with clarity. Its versatile mounting options make it suitable for both home and professional settings.

Moving up in the lineup, the VX-7 is designed for those who demand a bigger sound. With a larger 6.5-inch woofer and improved power handling capabilities, the VX-7 enhances the listening experience with rich bass and clear high frequencies. The speaker employs MK Sound's proprietary technology to achieve a seamless soundstage, making it ideal for multi-channel audio setups or stereo listening.

The V-1B and V-2B models are subwoofers that take low-frequency reproduction to the next level. The V-1B, featuring a 10-inch driver, is engineered to deliver punchy bass while maintaining precision. Its robust amplifier ensures powerful performance, perfect for home theater applications. The V-2B, with its dual 12-inch drivers, is designed for audiophiles seeking the ultimate bass experience. This subwoofer showcases extraordinary extension and dynamics, making it indispensable for cinema enthusiasts and music lovers alike.

Lastly, the MX-100 is MK Sound's flagship processor that brings sophisticated control to any audio system. It supports advanced audio formats and includes intuitive crossovers, ensuring seamless integration with all MK Sound speakers. The MX-100's customizable settings allow users to tailor their audio experience, maximizing both performance and enjoyment.

Overall, MK Sound’s VX-4, VX-7, V-1B, V-2B, and MX-100 embody cutting-edge technology and expert craftsmanship. Each product offers unique features designed for superior audio performance, ensuring that every listener experiences sound as it was meant to be heard. With MK Sound, quality and innovation remain at the forefront of audio reproduction.
Top Page Image Contents