Modulaire AM/FM Component Stereo System | Faxback Doc. # 18931 | |
Controls | ||
POWER SWITCH
Depressing the white dot on the switch will turn the unit on, at which time the dial will illuminate.
SELECTOR SWITCH
This switch will select the program source that will be reproduced by your system.
AM
In this position, all standard AM broadcasts are reproduced.
FM MONO
In this position, all FM broadcasts will reproduced monaurally. If the stereo indicator illuminates, it is an indication that the station is transmitting stereo broadcasts.
FM STEREO
In this position, your system is capable of reproducing FM stereo broadcasts in stereo. It will also reproduce monaural broadcasts monaurally.
PH/TAPE
In this position, your system will reproduce either a tape or record depending on the device that is being used.
VOLUME
Controls the loudness of the system, rotation in a clock, wise direction increases the loudness and rotation in a
BALANCE
This control is used to balance any differences in level from left to right channel due to difference in program material or associated equipment Control should be set for approximately equal levels from your speakers.
