CRITICAL DIMENSIONS
(DO NOT SCALE)
SpecificationsFOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
NOTE:THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Model: 4625 series
Bulk Pack (12 Per Carton):
64624 series
with 50/50 Waste Assembly
Bulk Pack (12 Per Carton):
64625 series
Less Waste
Bulk Pack (12 Per Carton):
64600 series
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
DECK PLATE
Lift
Rod
TOP OF
MOUNTING
SURFACE
2-3/8"
(?mm)
ESC.
WIDTH
6-7/54" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
4-3/8"
(111mm)
5-1/4" (133mm)
OPEN POSITION
2"
(51mm)
3/8" X 16"
TUBING SUPPLIES
2"
(51mm)
Rev. 6/08
There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
•Metal construction with various finishes identified by suffix
•16" supplies
•Includes metal pop-up type waste assembly
OPERATION
•Acrylic knob style handle
•Pull-on/Push-off
•Temperature controlled through 180˚ degree arc
of handle travel
FLOW
•Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
•1225 cartridge design
•Nonmetallic/nonferrous and stainless steel material
•Can accommodate reversed piping and back to back
installations
STANDARDS
•Third party certified to WaterSense,® CSA B-125, ASME
A112.18.1M and all applicable requirements referenced therein
•Certified to ANSI/NSF 61/9
•Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
WARRANTY
•Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations