CRITICAL DIMENSIONS
(DO NOT SCALE)
SpecificationsFOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 6/08
DISCONTINUED
STYLE
DESCRIPTION
•Metal construction with various finishes identified by suffix
•16" supplies
•Includes metal pop-up type waste assembly
OPERATION
•Acrylic knob style handle
•Pull-on/Push-off
•Temperature controlled through 180˚ degree arc of handle travel
FLOW
•Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
•1225 cartridge design
•Nonmetallic/nonferrous and stainless steel material
•Can accommodate reversed piping and back to
back installations
STANDARDS
•Third party certified to WaterSense,® CSA B-125, ASME A112.18.1M
and all applicable requirements referenced therein
•Certified to ANSI/NSF 61/9
•Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
WARRANTY
•Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Model: 4625 series
NOTE:THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3 HOLES, 1" MIN. DIA.
SPACER PROVIDED –
DISCARD IF MOUNTING
SURFACE IS MORE THAN
3/4" (19mm) THICK
1-3/4" (45mm)
MAX.
2"
(51mm)
3/8" X 16"
TUBING SUPPLIES
2"
(51mm)
3-5/8"
(92mm)
5" (127mm) OPEN
POSITION
1-3/4"
(45mm)
DECK PLATE
TOP OF
MOUNTING
SURFACE
2"
(51mm)
ESC.
WIDTH
6" (152mm)
ESCUTCHEON WIDTH
LIFT
ROD