Installation Instructions
REVERSING THE DOOR SWING
IMPORTANT NOTES
When reversing the door swing:
NOTE: Door swing is not reversible on stainless steel models.
•Read the instructions all the way through before starting.
•Parts are included in the door hinge kit.
•Handle parts carefully to avoid scratching paint.
•Set screws down by their related parts to avoid using them in the wrong places.
•Provide a
IMPORTANT: Once you begin, do not move the cabinet until
These instructions are for changing the hinges from the right side to the left
•Once door swing is finalized, ensure the logo badge is properly aligned and permanently secured to the door by removing the adhesive cover on the back side. NOTE: A replacement logo badge is included in the hinge kit.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy compartment.
TOOLS YOU WILL NEED
Adjustable Wrench | 5/16″ Socket | |
Ratchet/Driver | ||
| ||
Masking Tape |
Phillips Screwdriver |
| Torx |
|
|
|
13
1REMOVE THE REFRIGERATOR DOOR
ATape the door shut with masking tape.
BRemove the hinge cover on top of the refrigerator door by carefully prying it up with a putty knife, if necessary.
CUsing a 5/16″ socket ratchet/driver, remove the bolts securing the top hinge to the cabinet. Then lift the hinge straight up to free the hinge pin from the socket in the top of the door.
DCarefully remove the door thimble from inside the socket. This will be used again when reinstalling the door on the other side.
Hinge Cover |
Top Hinge
Door Thimble
ERemove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin. Ensure that the plastic hinge pin thimble remains on the hinge pin or inside door hinge pin hole located in the bottom of the door.
FSet the door on a