Technical data sheet for
GAS COOKTOPS 600mm
Overall Construction
Cooktop
•Welded hob with 1.5mm 304 stainless steel bull nose
•Splashback and side panels 1.2mm 304 stainless steel
•Front panels 0.9mm 304 stainless steel
•Aluminised steel internal construction
•Cast iron 28MJ/hr open burners with forged brass cap
•Vitreous enamelled cast iron potstands
•Vitreous enamelled open burner spill covers
•Cast iron simmer plates (optional extra)
•12mm thick mild steel griddle plate
•2.5mm 304 stainless steel griddle splash guards
•Vitreous enamelled spill trays
Griddle sections are standard on RH side. Available on LH side to order or by conversion.
Bench mount (supplied as
•Four 63mm dia.
•Adjustable height 80mm – 105mm
Cabinet base (supplied as
•Fully modular for match suite finish
•Double skin 0.9mm 304 stainless steel interior and exterior
•Optional GN 1/1 4 position racking kit
•63mm dia.
3 models of base unit Stainless steel exterior Easy clean
Easy service Fully modular
Leg stand (supplied as
•Fully modular for matched suite finish
•Framed top for connection to Cooktop
•63mm dia.
•Fully modular framed stand shelf with 0.9mm 304 stainless steel finish
•Suitable for rear or through shelf gas connection to Cooktop
•Quick assembly design (no tools required)
Controls
•Variable high to low controls to open burners
•Open burners flame failure standard with pilot burners optional
•Variable high to low controls to griddles
•Griddles standard with pilot, flame failure and piezo ignition
•Large easy use control knob - heat resistant reinforced
•Easy view control settings on knob
Cleaning and Ser vicing
•All models with easy clean stainless steel external finish
•Lift off burners heads and vitreous enamelled burner spill covers
•Vitreous enamelled spill trays under open burner and griddle sections
•Access to all parts from front of unit