Air Filter Element Maintenance
1.Wipe off the air cleaner cover.
2.The air cleaner cover is held in place by a wing nut or clamps. Remove it.
3.Remove the air filter element.
4.Cleaning:
a.For “paper” filter elements:
To prevent injury from dust and debris, wear
If this does not get the filter reason- ably clean, replace it.
b.For foam filter elements:
Wash the element in warm water and mild detergent several times. Rinse. Squeeze out excess water and allow it to dry completely. Soak the filter in lightweight oil briefly, then squeeze out the excess oil.
5.Install the new filter or the cleaned filter. Secure the Air Cleaner Cover before use.
Spark Plug Maintenance
1.Disconnect spark plug wire from end of plug. Clean out debris from around spark plug.
2.Using a spark plug wrench, remove the spark plug.
3.Inspect the spark plug:
If the electrode is oily, clean it using a clean, dry rag.
If the electrode has deposits on it, polish it using emery paper.
If the white insulator is cracked or chipped, the spark plug needs to be replaced.
4.When installing a new spark plug, ad- just the plug’s gap to the specification on the Technical specification chart.
Do not pry against the electrode or the insulator, the spark plug can be damaged.
5.Install the new spark plug or the cleaned spark plug into the engine.
6.Apply dielectric spark plug boot protector (not included) to the end of the spark plug and reattach the wire securely.
Fuel Filter Replacement (if equipped)
WARNING! To prevent serious injury from fire:
Replace the fuel filter in a
1.Wait for engine to cool completely before proceeding.
2.Wear protective gear including, ANSI- approved safety goggles, NIOSH- approved dust mask/respirator, and nitrile gloves.
3.Wipe gas refill cap and surrounding area. Remove gas refill cap.
SKU 65761 | For technical questions, please call | Page 16 |
