Harbor Freight Tools 65761 manual Save these instructions, Service precautions

Service precautions

1.Before service, maintenance, or cleaning:

a.Turn the engine switch to its “OFF” position.

b.Allow the engine to completely cool.

c.Then, remove the spark plug wire(s) from the spark plug(s).

2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechani- cal guards, and heat shields, among other guards.

3.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or dis- tributor. Only a qualified service technician may adjust parts that may increase or decrease gov- erned engine speed.

4.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during service.

5.Maintain labels and nameplates on the equipment. These carry impor- tant information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equip- ment is maintained. Do not attempt any service or maintenance proce- dures not explained in this manual or any procedures that you are un- certain about your ability to perform safely or correctly.

7.Store equipment out of the reach of children.

8.Follow scheduled engine and equip- ment maintenance.

9.Refueling Precautions:

a.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

b.Do not refill the fuel tank while the engine is running or hot.

c.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

d.Refuel in a well-ventilated area only.

Save these instructions.

SKU 65761 For technical questions, please call 1-800-444-3353. Page 7