Harbor Freight Tools 65761 manual Transport Maintenance, For technical questions, please call

the compression stroke (when you start to feel resistance).

f.Disconnect battery cables (if equipped).

g.Wipe engine with clean cloth.

3.Apply a thin coat of rust preventive oil to all uncoated metal parts.

4.Cover and store in a dry, well-ventilat- ed area out of reach of children.

5.Before starting the engine after stor- age, keep in mind that untreated gas- oline will deteriorate quickly. Drain the fuel tank and filter, and change to fresh fuel if untreated gasoline has been sitting for a month, if treated gasoline has been sitting beyond the fuel stabilizer’s recommended time period, or if the engine does not start properly.

Transport Maintenance

1.BEFORE transport, check the Tires for wear and proper inflation (60 PSI).

2.Prior to Transport and at 500 MILE in- tervals during trips, check and tighten the Tire Lug Nuts. Torque from 85 to 90 ft-lb.

3.EVERY 2,000 TO 3,000 MILES of Travel, lubricate the Hub Assemblies with a heavy weight bearing grease. Follow the Bearing Packing Instruc- tions. After each Hub Assembly is reassembled, tighten the Castle Nut until the wheel starts spinning with slight resistance. Loosen the Castle Nut about 1/2turn from this point. Insert a new Cotter Pin through the Castle Nut and the hole in the axle. Bend the Pin back, locking it and the Nut in place.

SKU 65761 For technical questions, please call 1-800-444-3353. Page 18