SP6549 Manual 71235 7/12/05 3:17 PM Page 4
Humidifier Operations
Your new MoistAir humidifier is designed to satisfy home humidity requirements through the principle of evaporation of water in the air.
After water is added to the humidifier, the filter begins to soak up the water and will become saturated in approximately 30 minutes. Air drawn in through the open- ings in the lower housing passes through the filter by means of a circulation fan. As air passes through the filter, moisture is absorbed into the air and then released in the form of vapor. No water droplets will enter the home. All evaporation into the air takes place in the humidifier, which means that the residue left by evaporat- ing water is not passed into the home, but remains in the filter.
This natural process of evaporation helps eliminate the chance of white dust in the humidified output air.
CAUTION: Use only liquid EPA Registered Bacteriostat available from local Retail store. Under no cir- cumstances should you use water treatment products designed for Roto belt or Ultrasonic humidifiers.
Humidified air is then released through the top
Dry air enters through the louvers in the housing
CAUTION: To reduce the risk of injury, fire or damage to humidifier, use only cleaners specifically recom- mended for humidifiers. Never use flammable, combustible or poisonous materials to clean your humidifier. To reduce the risk of scalds and dam- age to humidifier, never put hot water in humidifier.
Assembly
Carefully remove the humidifier and all other contents from the carton.
There is a black strip that contains six pads for the bottom of the humidifier. Remove each pad and place one on each of the six legs on the bottom of the base as shown, by the solid dots.
Once installed return the humidifier to it’s original state and proceed to “Locations Instructions”.
2
1
6
5
3
4
4
