P r i n t i n g

Refer to the printer’s documentation for information on loading supplies and printing.

R e p l a c i n g t h e F u s e

The vehicle mount uses a 10-amp, 125-volt fuse (order part 127983). The fuse is located on the cable on the right side of the vehicle mount. To replace it:

1. Push in and twist the fuse holder counterclockwise to open it.

2. Remove the fuse.

3. Insert a new fuse of equal rating. The replacement fuse must have a DC voltage rating of at least 125 volts.

4 . Place the two halves of the fuse holder together and push in and twist clockwise to tighten it.

Fuse holder

7