S e t t i n g U p t h e P r i n t S e r v e r
For the 9840 printer:
To use the Ethernet print server (with the 9840 printer), upper DIP switch 8 must be turned ON. This enables the
Upper DIP Switches
Ethernet Port
Parallel Port
Serial Port
9840 Printer Pictured
Do not plug any cables into the parallel port when using
the Ethernet port.
A printer with an Ethernet port cannot use the parallel port. However, the serial port is still active.
For the 9825 and 9850 printer:
From the Main menu, select Setup, Port Settings, then Parallel Comm. Then, follow these steps:
1. Press | or | until you see |
PARALLEL COMM
Port
2.Press Enter/Pause. You will see the current setting, for example
PORT
Internal
2
