Monessen Hearth VWF18, VWF36, VWF30 manual Getting Started, Make Sure You Have Received All Parts

Models: VWF36 VWF30 VWF18

1 56
Download 56 pages 13.11 Kb
Page 5
Image 5
GETTING STARTED

GETTING STARTED

MAKE SURE YOU HAVE RECEIVED ALL PARTS:

Check your packing list to verify that all listed parts have been received. You should have the following:

BURNER - GRATE ASSEMBLY 18, 24, 30, 36"

• Burner and Grate Weldment Assembly

Lava Rocks (x2)

Extenders with Knob (Manual Control Only)

• Glowing Embers (Rock Wool)

Damper Clamp

Vermiculite

Installation /Operating Instructions

3/8" Aluminum tube with 3/8" 90° elbow, 1/2" to 3/8" tube fitting

Control Cover

Shield Plate

 

 

18", 24", 30" OR 36" CERAMIC FIBER OR REFRACTORY LOGS

 

Individual Logs

 

• Installation Instructions

CAUTION

Handle the gas log burner assembly by the grate only. Do not pick the unit up by the burner. Burner pan is a separate assembly.

Gloves are recommended when handling ceramic fiber logs to prevent skin irritation from loose fibers. Logs are fragile — handle with care.

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts in good condition.

ITEMS REQUIRED FOR INSTALLATION

Ensure that the following items are available before proceeding with installation:

External regulator (for propane/L.P.G. only)

Shutoff valve

Piping which complies with local codes

Pipe wrench

Pipe sealant approved for use with propane/L.P.G. (Resistant to sulfur compounds)

Drill with masonry bit (for mounting to the floor)

MINIMUM OPENING AREA OF CHIMNEY DAMPER FOR VENTING

WARNING

The fireplace and gas logs function as a system. If the fireplace is not drafting properly and spilling into the room (check with a match or a smoke stick), reposition the damper clamp until a positive draft is obtained by opening the damper. If negative pressure in home prevents having a positive draft, contact your dealer for assistance.

MINIMUM CHIMNEY HEIGHT AND FLUE OPENING

CHIMNEY HEIGHT

FLUE OPENING

6'

64 sq in

8'

64 sq in

10'

64 sq in

15'

51 sq in

20'

51 sq in

30'

51sq in

27D8520

5

Page 5
Image 5
Monessen Hearth VWF18 Getting Started, Make Sure You Have Received All Parts, Minimum Chimney Height And Flue Opening