Specification
Amplifier Output:
Frequency Response:
Crossover (Low Pass):
EQ:
Equalisation:
Digital Volume Level:
Auto Sensing
Input Requirements:
Variable Phase Control:
Internal Memory:
Cabinet Specification:
Amplifier Classification:
Driver Compliment: coil
Dimensions (H x W x D):
Weight (unpacked)
Mains Input Voltage:- (Factory Preset)
Fuse Type
Trigger Input
Code System for All in One Remote Controls
1000 Watts (RMS) 2000 Watts (Peak)
16Hz - 40/160Hz Variable
40Hz - 160Hz
Variable slope characteristic from 12 – 36dB/Octave
16 - 31Hz
4 x Preset
1 x User Set
Graphic 9 Band Equaliser.
± 6dB in 0.5dB steps
Line Level >5mV (RMS)
Variable auto off 5 – 30 minutes in 5 minute intervals, user adjustable.
0, 45, 90, 135, 180, 225, 270, 315°
3 Independent Memory locations
Sealed Cabinet with 30mm M.D.F construction with critical internal bracing. Sealed amplifier compartment.
Class- D amplifier, with DSP control
1 x 15”
455 x 485 x 475mm
17 15/16 x 19 1/8 x 18 11/16”
All dimensions excluding grille and feet
50Kg (110lbs)
110
For countries with 220 – 240Vac supply use: 4A/250V 20MM UL/VDE
For countries with 110 – 120Vac supply use: 8A/250V 20MM UL/VDE
3.5mm Jack input, +12Vdc = On State
NEC SH6122
12 | monitoraudio.co.uk |
PLW15 manual.indd 12
30/04/2008 10:59:58