Monster Cable 2600 MKII owner manual Rack Mounting Your PowerCenter, Hook-Upguide, Rack Ears

Models: 2600 MKII

1 70
Download 70 pages 61.49 Kb
Page 21
Image 21
Rack Mounting Your PowerCenter

HOOK-UP GUIDE

Rack Mounting Your PowerCenter

This Monster PowerCenter includes two “rack ears” mounting plates for installation into a standard size equipment rack.

A)Remove your PowerCenter trim covers using a 332" or 2.5mm Allen (Hex) key (not included). Turn each Allen screw counter-clockwise until the screw is completely removed.

B)Align one rack ear over the two holes on the left side of the PowerCenter. Using the Allen key, turn the two screws clockwise until tight. Repeat this step for the right side of the PowerCenter.

C)Place the PowerCenter into the rack and align the holes with the holes of your rack. Insert rack screws (not provided) and turn clockwise until tight.

Rack Ears

15

Page 21
Image 21
Monster Cable 2600 MKII owner manual Rack Mounting Your PowerCenter, Hook-Upguide, Rack Ears