29
PROBLEMYou can’t turn on the PowerCenter via the Remote DC control.
Possible Cause
The custom audio video control center your PowerCenter is connected to (via remote DC cable) does not have power.
Possible Solution
Turn On your Custom Installation component.
PROBLEMUnswitched LED on front panel is Off
Possible Solution
Plug the PowerCenter into a properly grounded 120V outlet.
PROBLEMSwitched LED and outlets are Off
Possible Cause #1
You are using the Switched Outlet Remote Turn-On feature and haven’t plugged the two-prong cord
into the component you wish to use to activate the Remote Turn-On.
Possible Solution
Plug the two-prong cord into the component you wish to use to activate the Remote Turn-On.
Possible Cause #2
The component remote control you are using to power the Remote turn-on has a dead battery.
Possible Solution
Replace the battery powering the component remote control.