ENGLISH
Operations
•Note : Before operating this receiver with the supplied remote control, refer to “Universal Remote Controls” on page 13 for details about operation.
LISTENING TO A PROGRAM SOURCE
Before operation
• Enter the standby mode. | POWER |
• The STANDBY indicator lights up. |
|
When the power operation switch | ON/ OFF |
| |
is in the OFF or STANDBY state, |
|
the apparatus is still connected on |
|
some AC line voltages. |
|
Please be sure to unplug the cord when |
|
you leave home for, say, a vacation. |
|
•To switch the power off, push the POWER switch again.
•Then the power is cut off and the STANDBY indicator goes off.
In the standby mode, turn the power on.
1
POWER ON | STANDBY |
STANDBY
ON/STANDBY
or
•In the operating mode, if the STANDBY button on the remote control is pressed, the receiver is turned off and enters the standby mode.
•In the standby mode, if the INPUT SELECTOR button on the remote control is pressed, the receiver is turned on automatically and the desired input is selected.
2 | Switch the speakers on. | SPEAKER |
| ||
| ON/OFF | |
|
|
•Then the SPEAKER indicator lights up and the sound can be heard from the speakers connected to the speaker terminals.
•When using the headphone for private listening, press the SPEAKER button again to switch the speakers off.
Select the desired input source.
3
INPUT SELECTOR
AUDIO VIDEO
TUNER | CD | AUX | TAPE |
1 | 2 | 3 | 4 |
or | VIDEO 1 | VIDEO 2 | VIDEO 3 |
| 6 | 7 | 8 |
•Each time the “AUDIO” button on the front panel is pressed, the input source changes as follows;
TUNER CD TAPE AUX
(frequency display)
•Each time the “VIDEO” button on the front panel is pressed, the input source changes as follows;
VIDEO 1 VIDEO 2 VIDEO 3
When selecting the EXTERNAL IN as desired,
INPUT SELECTOR
EXTERNAL IN
or
EXT. IN
•“EXT IN” is displayed and the 7 or 6 separate analog signals from the component connected to this input can be controlled only by channel level(s) and volume depending on the surround back speaker setting.
•Press the EXTERNAL IN button or select the desired input source to cancel the external in function.
•These analog signals can be heard only, not recorded.
25
