Sherwood RD-8601 Connecting System Control, SUBWOOFER PREOUT connection, Connecting Speakers

6. CONNECTING SYSTEM CONTROL

•Connect this jack to the DIGI LINK jack of the external Sherwood component that uses the DIGI LINK II or III remote control system.

Sherwood component with DIGI LINK II or III

CD player

System

Tape deckcontrol cord

DIGI-LINK DVD player

ENGLISH

7. SUBWOOFER PREOUT connection

•To emphasize the deep bass sounds, connect a powered subwoofer.

8. CONNECTING SPEAKERS

•Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass.

•For installing the speakers, refer to “Speaker placement” on page 9.

•After installing the speakers, first adjust the speaker settings according to your environment and speaker layout.(For details, refer to “Speaker Setup” on page 19.)

Caution :

•Be sure to use the speakers with the impedance of 6 ohms or above.

•Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.

PRE OUT

SUB WOOFER

Powered subwoofer

Front right	Front left	(Front)
		Center

					SURROUND
FRONT		SURROUND		CENTER
SPEAKERS		SPEAKERS		SPEAKER	BACK
(6 )	(6 )		(6 )		(6 )

Surround

Surround Surround

right left

back

8