Home Theater connections
Basic connections
Connecting STB etc.
Use this connection to enjoy STB
Digital audio out (optical) HDMI input | TV | ||
|
|
|
|
|
|
|
|
HDMI IN
Connection
HDMI cable | Main unit |
|
| HDMI OUT | |
STB etc. | Digital audio | |
out (optical) | ||
|
Make sure to connect |
|
| |
to TO TV (ARC) . |
| ||
HDMI Video/ | |||
DVD recorder, etc. | |||
Audio out | |||
| |||
Setting for automatically switching the input source to STB
When you make the above connection and you use the Panasonic TV (VIERA), you can automatically switch this system’s input by switching the input source of the TV (VIERA) to STB in the following procedure.
Preparation: Make sure that this system has been turned on. (➜ page 16)
To return to the previous display/To cancel during setting operation in steps 2 to 5: Press [
RETURN].
1.Switch the input source of TV (VIERA) with the above connection and show STB pictures.
2.Press and hold
The setting items are displayed. (➜ page 21)
3.Press [w][q] to select “STB AUDIO ” and press [OK].
4.Press [e][r] to select “SET ” and press [OK].
SET : The setting is automatically switched to “AUX2 / STB ”.
OFF : The setting is not automatically switched to “AUX2 / STB ”. (factory setting)
5. Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.
Home Theater connections
Note
•“STB AUDIO ” in step 3 is displayed only when the unit is connected to the Panasonic TV (VIERA). Also, this is not displayed when the step 1 operation is not performed.
•If you change the connection after setting, select “OFF ” once and “SET ” again.
•When you select “EXIT ” and press [OK] in step 3, the setting mode finishes.
Connecting cables to audio terminals (DVD player, etc.)
• Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
TV | Audio out |
Main unit
L
R 
VIDEO IN
AUDIO IN
Video cable (A)
Audio cable (B)
DVD player etc.
VIDEO OUT
AUDIO OUT
10
A: Connect the video cable directly from the other equipment to the television.
B: Use this connection so audio from the equipment can be heard through the television speakers even if this system is in Standby mode.
Reduce the volume on the television and select “TV ” after you have made connections as above if you want to use this system.
VQT2R70
