Panasonic SC-ZT2 warranty VIERA Link “HDAVI Control” setting, Switching between dual sounds, Play

VIERA Link “HDAVI Control” setting

When you do not wish to use VIERA Link “HDAVI Control”

(➜ page 18), you can set the unlinked operation by selecting “OFF ”.

The normal setting is “ON ” (Linked operation).

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “HDMI ” and press [OK].

3.Press [w][q] to select “CTRL ” and press [OK].

4.Press [e][r] to select “ON ” or “OFF ”

and press [OK].

ON : When the operation is linked

OFF : When the operation is not linked

Factory setting: ON

5.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Note

•When “CTRL OFF ” is set, the ARC function will be disabled. Be sure to make the optical digital connection or analog connection. (➜ page 9)

Adjusting the time lag between audio and video by delaying audio output

You can reduce audio and video time lag by adjusting sound delay.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “SOUND DLY ” and press [OK].

3.Press [e][r] to select the setting and

press [OK].

AUTO, OFF, 10, 20, 30, 40, 60, 80, 100, 120, 140,160, 180, 200

Factory setting: AUTO

4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Note

•If delaying audio output is not necessary, select “OFF ”.

•“AUTO ” is effective only when connecting the Panasonic TV (VIERA) supporting HDAVI Control 3 and later versions. (Auto Lip Synchronization Function)

•When you connect the Panasonic TV incompatible with HDAVI Control 3 and later versions or non-Panasonic TV, if “AUTO ” is set, “40 ” (msec) is set.

Switching between dual sounds

You can switch between dual sounds of Dolby Digital signals.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “DUAL PRG ” and press [OK].

3.Press [e][r] to select the audio and press

[OK].

MAIN : Main audio SAP : Sub channel audio output

M+S : Main + Sub channel audio output

Factory setting: MAIN

4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Clear audio at low volume

Dynamic range compression function for Dolby Digital.

It compresses the dynamic range so that you can still hear dialog and leave the sound field unaffected.

Use this function when you have to turn the volume down, such as late at night.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “DRCOMP ” and press [OK].

3.Press [e][r] to select the setting and

press [OK].

OFF : Normal playback

STANDARD : The best suited playback for each audio source

MAX : Always compressed at the maximum level

Factory setting: OFF

4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Switching the attenuator

Switch the attenuator “ON ” when big sounds become distorted while playing an analog input source.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “ATTENUATOR ” and press [OK].

3.Press [e][r] to select “ON ” and press

[OK].

ON, OFF

Factory setting: OFF

4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Functions and settings

Play

23

VQT2R70