Panasonic SC-ZT2 warranty Speaker setting, Setting the speakers, Preparations, Press and hold

Speaker setting

Setting the speakers

Make sure to make this setting when using for the first time after purchase.

Preparations

„Make sure that all equipment has been turned off.

(When the VIERA Link “HDAVI Control” compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are connected, do not turn on the TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) until the setting is complete.)

„Connect the AC power supply cords of main unit and 2 speakers to household AC outlets. (➜ page 12)

„Make sure that the main unit and speakers have been turned off.

„Prepare the remote control. (➜ page 7)

1.Turn the main unit on.

Press

2.Turn 2 speakers on.

[WIRELESS LINK] indicator 

WIRELESS LINK

Press POWER

•“2CH SEARCH ” appears on the display. (This is displayed only at the first-time setting.)

•The color of the [WIRELESS LINK] indicator changes from red to green.

•When the [WIRELESS LINK] indicator of each speaker lights green, “2CH SEARCH ” display disappears.

When installing surround speakers

See “Installing surround speakers” (➜ page 14) and “Setting surround speakers” (➜ page 15).

Connection

3.Press and hold [CH] on the remote control for about 3 seconds until “2 SPKR SET ” is displayed on the main unit’s display.

	“2 SPKR SET ”
Always aim the
remote control at
the main unit for
operation.	Press and hold
	(about 3 seconds)

4.Press the remote control button corresponding to the speaker outputting the confirmation sound.

Front speaker	Front speaker	When the sound is		When the sound is output
		output from the front
				from the front speaker
(left)	(right)	speaker (left),
			GAME MUTE	(right), press [MUTE].
		press [GAME].

•Sound is output from either of the speakers.

•When you press the button corresponding to the confirmation sound of a speaker, another speaker outputs the confirmation sound. Press the corresponding button in the same way and complete settings for the 2 speakers.

•When “COMPLETE ” disappears from the main unit’s display, the speaker setting is complete.

Speaker setting

Note

•Check if the speakers are properly set after setting the speakers. (➜ page 14)

•If the speakers are set incorrectly in step 4, turn the main unit off then on again and perform steps 3 and 4.

• If the [WIRELESS LINK] indicator does not change from red to green, see page 27 of “Troubleshooting guide”. 13

VQT2R70