ENGLISH
Adjusting the tone(bass and treble)
Enter the tone mode.
10
TONE MODE
•Each time this button is pressed, the corresponding tone mode is selected and shown for several seconds as follows:
BASS TRBL(treble) TONE ON
•When the tone mode is off, “TONE OFF” is shown.
At the desired tone mode, adjust the tone
11 as desired.
ADJUST
•At “TONE ON” mode, you can select “TONE OFF” mode and vice versa.
TONE ON : When adjusting the tone for your taste. (“DIRECT” indicator goes off.)
TONE OFF : When listening to a program source
without the tone effect.
(“DIRECT” indicator lights up.)
•In general, we recommend the bass and the treble to be set to 0(flat) level.
Notes:
•If the tone display disappears, start from the step again.
•Extreme settings at high volume may damage your speakers.
•When the digital signals from DTS, Dolby Digital or MPEG program sources are input or the EXTERNAL IN is selected as an input source, you cannot adjust the tone and can hear a program source without the tone effect.
27
