Installation
[CAUTIONI
To avoid damage to outside wall of house, especially
if wall is weak or outside supports sit between studs in wall, place wood blocks (not provided) between
wall and each adjusting foot.
8.See Figure 26. Place carpenters'level on outer case. Rear of case should be 1A"to 3/8" lower than front of case (about ¼ bubble on level). Turn each adjusting foot on outside supports in or out until it begins to contact wall. Adjust position to achieve proper slope for case.
Figure 26. Adjusting Outer Case Slope
1.Level
2.Outer case
3.Wood block
Figure 27. Installing Sash Bracket
1.Indoor sash
2.Sash bracket
3.Sash bracket screw
3
10.See Figure 28. Expand right side curtain on air conditioner until curtain is tight against window frame. With curtain tight against frame, find top hole on curtain and mark location on indoor sash. Drill Ve"pilot ho!e into window sash, and secure curtain
to sash with Phillips screw (Item H). Repeat for left side curtain,
Figure 28. Securing Side Curtain
1.Indoor sash
2.Side curtain
[CAUTIONI
To prevent damage to window locking or lifting mechanisms from improperly placed sash bracket screw, inspect window carefully before drilling or installing screw in sash.
g, See Figure 27, Position sash bracket (Item F) on top of indoor sash, flush with outdoor sash. Secure bracket to outside sash using 7/8"sash bracket screw (Item G). Drill a 1/8"pilot hole so screw is easier to install.
11.See Figure 29. Measure and cut window seal strip (item I) to width of window. Stuff window seal strip between outdoor glass and top of indoor sash for tight seal to keep out heat and insects.
