Installation
Figure 29. Installing Seal Strip
1.Seal strip
2.Outdoor sash
3.Indoorsash
//1
12.See Figure 30. Under normal conditions, unit can evaporate water as fast as it is removed from indoor air. In very humid conditions, however, excess water may drip off chassis, To avoid dripping, install condensate drain cup (included with unit). Insert condensate drain cup through %" hole recessed in flange on right side of outer case bottom. Then place ½" diameter hose or tube on bottom spout of drain cup.
Rgure 30. Condensate Drain Cup Installation
1.Outer case
2.Condensate drain cup
3.Y2"diameter hose
13.See Figure 30A. With additional help, slide chassis into outer case. Attach base pan retaining clip to chassis with ¼" screw. Reinstall front frame, air
filter, and front grille. Because window sash helps keep unit in window, make sure sash contacts case before reinstalling chassis.
14.To be sure air conditioner installation is correct,
review all steps and ensure all parts are securely fastened, as outlined in instructions. If final inspection shows installation is solid and complete, air conditioner can be operated safely.
To begin operation, plug unit into electrical outlet.
Figure 30A. Attaching Chassis To Outer Case
1.Front frame
2.Base pan clip
3.Base pan handle
4.Chassis
24
(Models 70129, and 78189)
Kenmore Room Air Conditioners with
cases (models 70129, and 78189) are designed to be
installed in a window or through a wall. Following are instructionsare for wall installation.
NOTE: Kenmore Room Air Conditioner Models 78079 and
70089 (7000 and 9000 Btu) are designed for window installationonly. See instructions beginning on page 7.
Typical | Cabinet Dimensions |
|
|
Figure 31. | |||
| 12000 Btu | 18000 Btu | |
1. | 9 inches | 14½ | inches |
2. | 16½ inches | 19½ | inches |
3. | 233A inches | 25318inches | |
4. | 231/16inches | 28½ | inches |
3