Sherwood RD-8601 Setting The Speaker Setup Manually, Before setting the speaker setup, English

SETTING THE SPEAKER SETUP MANUALLY

Note: When the SPEAKER button is set to off or the EXTERNAL IN is selected as an input source, the speaker setup procedure cannot be performed.

Before setting the speaker setup

• Press the POWER switch to enter the standby mode and then turn the power on.

POWER	POWER ON
	STANDBY
ON/ OFF	ON/STANDBY

or

ENGLISH

1 When selecting each setting mode,

SPEAKER

SETUP

or

SPK SET

•Each time the SPEAKER SETUP button is pressed, the speaker setting mode changes in succession and is displayed for several seconds as follows.

•When the speaker setting mode disappears, press the SPEAKER SETUP button repeatedly to select the desired mode.

•When selecting the subwoofer,

“SUB-W Y”

•When selecting the front speaker size, “FRONT L”

•When selecting the center speaker size, “CENTER L”

•When selecting the surround speaker size, “SURR L ”

•When selecting the surround back speaker size, “SURR-B L”

2	When adjusting the selected mode to
	the desired setting,
	ADJUST
	or
	ADJUST

• Each time the ADJUST UP( / ) or DOWN( / ) button is pressed, one of the settings is selected

and displayed for several seconds as follows.

Y(es) N(one)

•When the subwoofer is set to “N”, the front speaker is automatically set to “L”.

•You can select one of 2 different speaker settings.

L S

(L: Large, S: Small)

• You can select one of 3 different speaker settings.

L S N

(L: Large, S: Small, N: None)

• You can select one of 3 different speaker settings.

L S N

•You can select one of 3 different speaker settings.

L S N

20