ASSEMBLY & ADJUSTMENTS cont.
EDGE GUIDE
The Edge Guide is useful for cutting a straight path along sidewalks, driveways, or other straight existing edges.
!WARNING: To avoid injury, ALWAYS turn off and disconnect the Edger from the power outlet BEFORE installing parts or cleaning the Edger or making any adjustments.
To place the Edge Guide in the down position:
1.Locate Edge Guide Adjustment Lever, press in, and turn clockwise to set Edge Guide in the down position (Figs. 8a, 8b). See position illustrations on lever.
OPERATION
POWER SWITCH LEVER
To turn Edger ON, press in the Power Safety
Fig. 9a | Fig. 9b |
Fig. 8a
Press Lever IN...
...Turn clockwise to lower Edge Guide
Fig. 8b
Lowered |
Edge Guide Position |
Power Switch |
|
Lever | |
Power Safety |
|
|
NOTE: The Edger is a major appliance and should not be operated simultaneously with other major appliances on the same household circuit.
Fig. 10
NOTE: You may need to tilt the Edger back to allow Edge Guide to be moved into the down position.
CUT LINE INDICATOR
Your Edger has a Cut Line Indicator located on top of the door of the Blade Guard. This shows the location of the Cutting Blade and enables you to position the Edger properly (Fig. 10).
Cut Line Indicator
Blade
16 | 17 |