UNPACKING
1.The Edger comes fully assembled except for the Handle, which is in pieces and connected by internal wiring, and must be assembled (Fig 1).
2.Included is a bag with the two Knobs and Curved Head Bolts for assembling the Handle.
3.Remove the Edger with Handle, along with bag of Knobs and Bolts, from the carton. Inspect your Edger.
4.Do not discard box or packing material until all parts are examined.
!WARNING: If any part of the Edger is missing or damaged, do not plug in the Edger until the damaged part is repaired or replaced.
DESCRIPTION
KNOW YOUR EDGER
NOTE: Before attempting to use this product, familiarize yourself with all operating features and safety rules.
Your Edger has a precision built electric motor and it should only be connected
to a
DO NOT operate this Edger on direct current (DC). The large voltage drop would cause a loss of power and the motor would overheat.
Fig. 1
Handle
Two Knobs and
Curved Head Bolts
(in plastic bag provided)
Remove Black Plastic Tube Coating from the piece of wire between the Handle and the
Upper Tube.
Handle
wire
Black Plastic | Upper | |
Tube Coating | ||
Tube | ||
| ||
Upper |
| |
Tube |
|
If the Edger does not operate when plugged into correct
This Edger has the following features:
1.
2.
3.Powerful 12.0 Amp, 4700 / min
4.Ergonomically designed Handle with comfort grip reduces fatigue and improves control.
5.Easy access to 7 ½” blade for cleaning debris.
6
7.Edge Guide Adjustment Lever raises or lowers Edge Guide.
8.
9.Cut line indicator helps maintain straight, even cuts.
Lower Tube
10 | 11 |