19
Lift canopy up aligning with the studs from mounting bracket.
22
Install medallion to one side of the blade. It is suggested to use different finishes for medallion and blade so they will not be the same finish.
25
Attach blade assembly to the motor and tighen screws securely.
28
Connect plug from fan to plug from light fixture.
20
Lift canopy ring up aligning with the studs from mounting bracket.
23
Install blade arm to reversed side of blade. Tighten 3 screws securely. Repeat for all 4 blades.
26
Remove 3 screws from switch cap cover. Save the screws for future use.
29
Install switch cap with fitter onto fan using 3 screws removed and tighten securely.
21
Install the 2 thumb nuts to the studs and finger tighen.
24
Check motor for shipping stabilizers and remove if present.
27
Remove finial nut, knurled nut, and glass finial cap from the fitter.
30
Install 3 x 40 watt candelabra bulbs. Bulbs not included.
