31
Install all 5 fan blade assemblies to the motor as shown above. Tighten screws securely.
34
Install the 2x50 watt halogen bulbs. Do not touch bulb surface as oily residue from skin can cause the bulb to explode.
37
Lift Canopy to ceiling aligning the key hole slots with the screws on the bottom of the Mounting bracket. Rotate the canopy Counter Clockwise to lock in place. Tighten the screws to secure the Canopy. See inset for Keyhole shape
40
Install wall control unit to outlet box using machine screws provided.
32
Loosen 3 of the 4 screws that will hold the light kit pan. Remove the screw that is associated to the closed hole on the light kit pan as shown in the inset.
35
Find the glass retainer with visible screw. Loosen the screw and tip the retainer to the side. Next lift glass and place the glass edge into the remaining glass retainers. Then lift the other side of the glass upward and tip the loosened glass retainer downward to engage the glass. Retighen the glass retainer screw.
38
Remove cover by snaping off from top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.
41
Attach front cover to wall control with screws provided.
33
Lift light kit pan to the fan motor assembly. Align the 3 screws with the key hole slot holes in the light kit pan (see inset). Rotate the light kit pan as shown. Then install the screw removed in the previous step though the closed hole. Tighten all 4 screws securely.
36
Remote Transmitter Dip swtiches
Remote Receiver Dip switches
Set dip switches on the Remote Transmitter and Remote Receiver to the same settings. This must be done so the units will communcate properly. If you have other fans you can set to control from one transmitter by setting both receivers the same as the transmitter. If you have more than one fan with remote. You can set the dip switches to different positiosns to have seperate control.
39
Attach cover of remote by placing over buttons and snaping into place.
42
Light dim- mer for up and down lights
Fan reverse button
To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off button. To dim upper lights press and hold U/L botton. To dim Lower lights press and hold D/L button. To turn off either up or down light press and quickly release either U/L or D/L button. Press button marked REV to reverse the rotation direction of the fan blades
