19
Lift Canopy to ceiling aligning the key hole slots with the screws on the bottom of the Mounting bracket. Rotate the canopy Counter Clockwise to lock in place. Tighten the screws to secure the Canopy. See inset for Keyhole shape
23
Loosen 2 screws and remove 1 screw from motor plate. Save removed screw for use later.
26
Connect plug from fan to switch housing plug.
29
Remove twin adhesive tape from the black capacitor as shown above.
20
Attach blade brackets to blades using the blade bracket screws and wash- ers provided.
24
Thread capacitor and 9 pin plug through switch housing plate.
27
Remove switch housing screws.
30
Place and press firmly on the capaci- tor to stick it to the switch housing. Be sure it is secure.
22
Check the motor for plastic shipping stabilizer tabs, and remove them if they are present. Attach blade assembly to motor using the motor screws and washers provided. Tighten screws securely.
25
Install by twisting clockwise, replace screw removed from motor plate. Tighten all 3 screws securely.
28
Black capacitor box needs to be stuck to the switch housing. Not being attached can cause motor noise.
31
Install switch housing cap using screws removed. Tighten securely.
