19
The screws, washers and motor pads are
22
Loosen 3 screw on light plate as shown.
25
Install the 3 x 40 watt incandescent candelabra bulbs.
28
Attach cover of remote by placing over buttons and snaping into place.
20
Loosen 2 screws with key slots and remove the 1 screw with closed slot. Save screw removed.
23
Plug white wire from fan to white wire from light kit. Then plug black wire from fan to black wire from light kit.
26
Place glass on light kit, hold in place and tighten finial cap in direction of arrow.
29
Install wall control unit to outlet box using machine screws provided.
21
Twist lower cover plate into place by twisting in direction of arrow. Replace 1 screw removed and tighten all 3 screws securely.
24
Place light kit over screws and twist direction of arrow into place. Then tighten all 3 screws securely.
27
Remove cover by snaping off from top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.
30
Attach front cover to wall control with screws provided.