31
Tighten keeper nut onto threaded pipe from the light kit.
34
Attach switch cap to fan by lining up 2 slot ear holes and 1 screw hole and twisting cap. Then tighten the 3 screws.
32
Install 3 x 60 watt Candelabra base bulbs.
35
Remove finial nut, finial cap, hex nut, and washer from fitter.
37
Install finial cap and finial nut to glass and tighten finial nut.
33
Locate blue and white wire from the fan marked “For light kit”. Connect blue from fan to black from light and white from fan to white from light by pushing connectors together.
36
Install rubber washer and hex nut to glass tighten nut.
