3Press the HOUR/MSF to adjust the alarm time by + 1 hour, press and hold HOUR/MSF to adjust the alarm clock by 5hrs/0.5 seconds.
4Press the MINUTE button to adjust the alarm time by + 1 minute, press and hold the MINUTE button to adjust the alarm clock by 5 min/0.5 seconds.
5To exit the alarm setting, press the TIME button once, or wait for 15 seconds the display will revert back to the time.
The alarm will activate at the set alarm time.
The alarm will automatically turn off after 59 minutes.
Setting the alarm 2 time
1Press the ALARM button twice in time mode. ‘AL 02’ will display when alarm is pressed.
2Repeat the same procedure as used for alarm 1.
Viewing the previous alarm type
1Press the ALARM button to select the setting for alarm 1 or alarm 2.
2Press and hold the SNOOZE button, the previous alarm type displays. Note : Do not press the SNOOZE button again, otherwise, the type of alarm will be changed.
3Press the TIME button, to exit the alarm setting mode. (The alarm mode will also exit if no buttons are pressed for 15 seconds).
Reviewing / setting the year
1Press and hold the TIME button for 3 seconds in time mode, the current year will be displayed.
2Press the MINUTE button once to change the year in the following sequence:
3Press the HOUR/MSF to change the setting by 10 years.
4If an incorrect date is entered after advancing the year by one, like Feb 29th 2001, the date will be set to the maximum day of that month, which is 28th Feb 2001 automatically.
5Press the TIME button to return to time mode. If you do not press any buttons for 15 seconds the clock will return to time mode.
Reviewing / setting the date
1Press and hold the TIME button for 3 seconds in time mode, the current year will be displayed.
2Press the SNOOZE button once for review / setting the date mode.
3The date will display, in ddmm format.
P.5
4To advance the day setting by 1, press the HOUR/MSF button once.
5To advance the month setting by 1, press the MINUTE button once.
6If an incorrect date is entered after advancing the month, like Apr 31st 2001, the date will be set to the maximum day of that month, which is Apr
30th 2001, automatically.
7Press the TIME button to return to time mode. If you do not press any buttons for 15 seconds the clock will return to time mode.
Reviewing the day of the week
1Press and hold the TIME button for 3 seconds in time mode, the current year is displayed.
2Press the SNOOZE button twice to review the day of the week, the day will appear on the display, dAY1 ... dAY7 will be displayed which stands for Monday to Sunday respectively. The day of the week cannot be changed but it is already set according to the date.
3Press the TIME button to return to time mode. If you do not press any buttons for 15 seconds the clock will return to time mode.
MSF Signal
1This mode starts when the HOUR/MSF has been pressed in time mode,
2If you want to review the current time when receiving MSF signal, press the TIME button.
3Press the HOUR/MSF to alternate between MSF on mode and off.
4When the MSF signal is detected the two digit counter will count up steadily from 00 to 59, until the clock is synchronised.
Note : If the two digit counter is not counting up, then it is not receiving the MSF signal, change the position of the unit for the best reception.
5When the TIME button is pressed or when a valid MSF signal has been received the clock will return to time mode.
6The unit will automatically synchronize at 12.00am and 3.00am everyday.
To stop the alarm tone (Alarm 1 and 2 have individual alarm tones).
The alarm is programmed to run for 59 minutes.
1To stop the alarm, press the ALARM button (6). The alarm will stop and will operate again 24 hours later.
2To stop the alarm temporarily, press the SNOOZE button (4). The alarm will sound again 9 minutes later.
3To switch the alarm setting off press the ALARM button once and release. Then press the snooze four times until the display reads
P.6
Snooze function
Once you have activated the snooze, the alarm will sound again after 9 minutes.
1Press the SNOOZE button (4), after 9 minutes the alarm buzzer will sound again.
Maintenance
Do not expose your clock to extremes of temperature. The product should
be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish.
Technical specification
AC Power supply | : | 230v AC 50Hz |
Battery | : | 4.5V DC type 3 x AA (not included) |
Warning labels
WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture.
ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer any servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of ‘dangerous voltage’ inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.
To prevent fire or shock hazard do not expose this apparatus to dripping and splashing.
Guarantee
Morphy Richards products are manufactured to internationally accepted quality standards. In addition to your statutory rights, Morphy Richards guarantee your product to be free from manufacturing and component defects for a period of TWO YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your Morphy Richards dealer from whom the product was purchased will be pleased to replace it free of charge.
Should your product develop a defect within the guarantee period but after the replacement period, please return the product to the following address, together with the proof of purchase, brief details of the symptoms and your own name and address.
Morphy Richards Limited
Talbot Road
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be repaired and returned to you promptly.
If you need any further advice, please call our Helpline (UK local rate) on: 08450 777700
Morphy Richards Website: www.morphyrichards.co.uk
446/8001/75 Rev 2
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product quality and design.
The company, therefore reserves the right to change the specification of its models at any time.
P.7
