40692 rev2 20/6/08 14:32 Page 6

F

G

Vertical steam F

Hold the iron in a vertical position between 1cm and 2cm away from the item F. Press the shot of steam button , this will create vertical steam. This feature is especially useful for removing creases from hanging clothes, curtains, wall hangings, etc.

Note; For optimum steam quality, do not operate the shot more than three times in succession.

No drip system

Your iron is fitted with a no drip system which is designed to prevent water escaping from the soleplate when the iron is too cold.

During use, the no drip system may emit a loud click, particularly during heat-up or whilst cooling down. This is perfectly normal and indicates that the system is functioning correctly.

Auto shut-off

Your iron is fitted with the auto shut-off function, it will automatically shut down after a set period. The ‘safety switch off’ LED will flash on the function panel.

If the iron is left unattended in the horizontal position, it will shut down after 1 minute.

If it is left in the vertical position, it will shut down after 8 minutes.

To reactivate the iron, gently shake it and wait for the iron to heat-up as normal.

Life long anti-scale system

The life long anti-scale system reduces scale deposits and helps prolong the life of the iron.

MAINTENANCE

Self cleaning G

Your iron has a built in cleaning system designed to keep the water valve, steam chamber and steam vents clear of lint and loose mineral deposits.

1Half fill the iron with water.

2Place the iron on it’s heel.

3Connect to a mains supply outlet.

4Set the temperature control to ‘MAX’. See ‘Temperature control’ on page 5.

5The indicator LED will flash until the required temperature is reached.

6The indicator LED remains ‘on’ when the selected temperature is attained.

7Disconnect the iron from the mains supply outlet.

8Hold the iron horizontally over a sink.

9Press and hold down the Self-clean button ‡ G.

10Steam and boiling hot water will drain from the holes in the soleplate, washing away the scale and minerals that have built up inside the Steam Chamber.

11Gently move the iron back and forth until the water tank is empty.

12When cleaning is complete, release the Self-clean button .

13Rest your steam iron back on it’s heel and allow to fully cool down.

14Wipe the soleplate with a cold, damp cloth.

After this cleaning operation, empty out any remaining water.

6

UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119

Page 6
Image 6
Morphy Richards 40692 manual Maintenance