40692 rev2 20/6/08 14:32 Page 7
WARNING: Keep hands and body away from the hot water.
WARNING: Do not attempt to descale the soleplate with descaling products.
To clean a stainless steel soleplate
To keep the soleplate of your iron clean and free of limescale, we recommend that you use one of the gentle chrome, silver or stainless steel cleaners that are generally available. Always follow the manufacturer’s instructions. To clean off melted
To clean a coated
soleplate (certain models)
In the unlikely event of any man- made fibre fusing to the soleplate, set the iron at the 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface.
Do not use scouring powder or solution as this could cause damage to the coating.
To clean the exterior
Allow the iron to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth.
Emptying and storing
When you have finished ironing, unplug your iron. Ensure that the variable steam control is set at the ‘0’ position, lift up the fill cap and empty any remaining water out of the filling hole. Do not store in the box, but in an upright position, so that any drops of water remaining cannot leak out and discolour the soleplate H.
Important: The flex can be damaged if wound too tightly around the iron after use. Make a loose loop with the flex and wrap it around the iron. The iron must be cool before winding the flex and storing on it’s heel I.
Helpline
If you have any difficulty with your appliance, do not hesitate to call us.
We are more likely to be able to help than the store from where you bought it.
Please have the following information ready to enable our staff to deal with your query quickly.
•Name of the product.
•Model number as shown on the underside of the appliance.
•Serial number as shown on underside of the appliance.
UK Helpline | 0844 | 871 0953 |
Replacement Parts 0844 | 873 0719 | |
Ireland Helpline | 1800 409 119 | |
H
I
7
