Morphy Richards 40734 manual Before Use, Components, Of Your Iron, Filling, Tank capacity, fi fl ‡ ·

RN40704 MUK Rev3:RN40704 MUK Rev3 19/02/2009 15:51 Page 4

	fi fl ‡ ·
	›
‹	‚
¤	„
⁄
	‰

		BEFORE USE
Â
		Sort out the items to be
		ironed according to the
		type of fabric. This will
		minimise the frequency of
		temperature adjustment for
		different garments.
		Note: The steam facility
		should only be used on
		garments which are
		suitable for ironing at the 2
	COMPONENTS	and 3 dot settings.
	OF YOUR IRON	When ironing with the
		steam facility at the 2 dot
⁄ Soleplate
		setting, the steam output
¤ Spray nozzle		should be set at the lower
		end of the steam range
‹ Filling hole with cap		(see the ‘Variable steam’
		section on page 5).
› Variable steam switch		Textiles and clothes are
fi Shot of steam button		supposed to carry ironing
		instructions. If they don’t,
fl Spray button		you should follow the
		fabric guide on page 3, but
‡ Auto shut-off indicator light		be sure to test the
		temperature by ironing the
	(certain models only)	hem of the garment or
· Temperature indicator light		similar area first.
	(red)	If you turn the control dial
‚ Life long anti-scale		‰ down from a hot setting
		to a cooler setting, wait
	(certain models only)	until the iron temperature
„ Water tank (illuminated on		has stabilised before you
		continue ironing.
	certain models)	Delicate fabrics such as
‰ Temperature control dial
		silk, wool, velour, etc, are
	with indicator	best ironed with an ironing
 Graduated filling beaker		cloth to prevent shine
		marks.

FILLING

1Make sure that the iron is not plugged in, then set the variable steam control › to the ‘0’ position before filling the iron with water.

2Lift up the filler cap ‹ and pour water through the hole into the water tank „, using the beaker provided  A.

A

After filling, replace the fill cap.

IN HARD WATER AREAS, THE USE OF DISTILLED OR DEMINERALISED WATER IS RECOMMENDED.

WARNING: Never use battery topping up fluid or water containing any substances like starch, or sugar, or defrosted water from a refrigerator.

3Always pour out the remaining water after use.

WARNING: When filling your iron with tap water, always use the beaker provided. Never fill directly under the tap.

Tank capacity

•Models 40704 / 40709 /

40732 / 40733: Advise 400ml

•Model 40734: Advise 350ml

4 UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119