![A](/images/new-backgrounds/62154/621547x1.webp)
45362 rev1 24/4/08 12:10 Page 4
A
B
C
D
E
F
G
BEFORE FIRST USE
Refer to the assembly sequence on this page.
When unpacking the fryer, make sure all packaging material is removed.
WARNING: make sure that your fryer is disconnected from the electricity supply.
Please note: Remove the filter from the lid before washing the lid.
Remove the frying basket, non stick bowl and lid, and wash these by hand in hot soapy water. Please note: do not leave in water to soak for a long period of time.
Dry all parts of your fryer thoroughly and replace the bowl, basket and lid.
Replace the bowl with the max/min lines to the rear. (Please follow the cleaning instructions).
WARNING: Do not immerse the main unit in water.
OPERATION
Lid operation
Press the lid release button down and in, the lid is spring loaded and will rise up on it’s own A.
In the upper position, the lid will lift out of it’s guides at the back for easy cleaning. To replace, locate in the guides and slide back into position B.
Close the lid by pressing down in the centre and ensure the locking catch „ is fully engaged.
Location of basket to drain
The basket can be raised into the rest/drain position or removed completely.
Take the basket out of the fryer and place the required amount of food in the basket. (Refer to page 8 for quantities).
Lift the basket back into the rest/drain position, then close the lid D.
Assembly / Disassembly sequence
The fryer has to be disassembled and assembled following this procedure.
•Open the lid and remove.
•Remove the basket.
•Lift out the tank.
Assembly is the reverse of the above process.
Replacing the bowl
Ensure the bowl contacts are dry before replacing E.
Ensure the max and min lines on the bowl are at the back of the fryer.
Filter
Press the locking tab back and lift out the panel F. The filter cannot be cleaned and should be replaced after 15 frying sessions. Always replace with the black side facing upwards. Remove the filter before washing the lid.
| Basket operation |
|
| Cord storage |
|
|
| ||
| Pull the basket handle to the |
|
| Wind the cord onto the cable |
| horizontal position to raise the |
|
| wind at the rear of the fryer G. |
| basket C. |
|
| Fully unwind the cord before |
|
|
|
| |
|
|
|
| use. |
|
| 4 | |
4 | |||
UK Helpline 0844 871 0952 Replacement Parts 0844 873 0718 Ireland Helpline 1800 409 119 |