47076 Rev1 29/4/08 11:28 Page 3
•Take care to pour hot coffee slowly and carefully without tipping the glass jug too fast.
•Do not place the glass jug on the hot plate unless the lid is in position.
•Do not fill above the capacity mark of the water level gauge.
•Make sure the mains lead does not touch the hot parts of the machine.
•Do not wind the mains lead around the hot appliance or store the appliance until it has fully cooled down.
Treating scalds
•Run cold water over the affected area immediately. Do not stop to remove clothing, get medical help quickly.
Other safety considerations
•Disconnect the coffee maker from the mains supply when filling, cleaning or not in use.
•When unplugging, turn any control to ‘off’, then remove the plug from the wall outlet.
•Keep the outside of the coffee maker area clean and dry at all times.
•Do not touch hot surfaces. Always use handles or knobs.
•Do not immerse the coffee maker itself in water and always ensure the electrical connections are kept dry.
•Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Ring the helpline number for advice on examination and repair.
•The use of attachments or tools not recommended or sold by Morphy Richards may cause fire, electric shock or injury.
•Do not use the coffee maker for anything other than it’s intended purpose.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.
WARNING : The plug removed from the mains lead, if severed, must be destroyed, as a plug with a bared flexible cord is hazardous if engaged into a live socket outlet.
Should the fuse in the 13 amp plug require changing, a 13 amp BS1362 fuse must be fitted.
WARNING: This appliance must be earthed.
3
