47076 Rev1 29/4/08 11:28 Page 5
OPERATING THE
APPLIANCE
Before use
Take your coffee maker out of the box and remove the packaging.
Wash the detachable parts of the machine in warm soapy water.
The first time you use your coffee maker, operate the coffee maker with water only.
General use
1Lift up the hinged reservoir lid ⁄.
2Fill the water reservoir with the required amount of water using the water level indicator ¤ as a guide A. Both the jug ‹ and the water level indicator are marked in cups. Do not exceed the maximum level on the water gauge.
3Spoon the required amount of ground filter coffee into the mesh filter ‚, spreading it evenly. We suggest one rounded dessert spoon for every cup, but individual tastes will vary. Ensure the filter is sitting properly in the filter holder and do not fill above the mesh line.
4Close the reservoir lid.
5Slide the jug into the coffee maker ensuring it sits correctly on the hot plate fi. The jug lid must be in place during the brewing process, otherwise the
6 | Plug the filter coffee maker in at | A |
| the wall socket and switch ON. |
|
| The LCD display fl will |
|
| illuminate to show the coffee |
|
| maker is working. |
|
7 | Press the on/off button to start |
|
| the brewing process. The red |
|
| power light will glow and the |
|
| coffee will start to brew. |
|
8Hot water will start to flow through the coffee grounds and into the glass jug as coffee.
9When the coffee has been made, serve as required. The
10Switch off the coffee maker when the jug is empty or the coffee is no longer required.
WARNING: The coffee maker and hot plate are hot and remain hot for some time after switching off.
11Allow the unit to cool.
12Remove the permanent filter and empty the used coffee grounds. Wash the filter immediately and dry thoroughly.
Refilling
•Switch off the coffee maker and allow 3 minutes to cool before refilling with cold water.
5