Morphy Richards manual Using your coffee maker, 47155 rev3Layout 1 02/09/2011 1352 Page

47155 rev3_Layout 1 02/09/2011 13:52 Page 3

Using your coffee maker

1 2

Fill the Water Tank (5) and place into the coffee maker.

Ensure the On/Off Switch (10),and Steam Control (2) are set to /Off. Select Coffee (8).

3

Plug the coffee maker into the mains.

5

Insert the Filter Holder into the Brewing Head (4) turning anti-clockwise until it locks fully into place. Place your cup(s) under the Coffee Dispenser (17).

7

Slide and release the One (6) or Two Cup (7) Switch to start brewing the desired amount of coffee.

4

Place the relevant Filter (14) or (15) into the Filter Holder (16). Fill with espresso coffee and tamp with Tamping Spoon (18), or use an E.S.E. pod.

6

Slide the On/Off Switch (10) to On. The Temperature Indicator Light (9) will stop flashing when the coffee maker is ready.

8

To stop or cancel the brewing process, slide and release the switch again.

3