![Using the Steam Wand to froth milk](/images/new-backgrounds/62174/621747x1.webp)
47155 rev3_Layout 1 02/09/2011 13:52 Page 4
Using the Steam Wand to froth milk
1
Fill the Water Tank (5) and place into the coffee maker.
3
Plug the coffee maker into the mains.
5
Place the Steam Wand (3) 10mm deep into a jug of milk. Turn the Steam Control (2) to On.
WARNING
WHEN FROTHING MILK ENSURE THE STEAM
CONTROL IS OFF BEFORE REMOVING THE
WAND FROM THE MILK.
2
Ensure the On/Off Switch (10),and Steam Control (2) are set to Off. Select Steam (8).
4
Slide the On/Off Switch (10) to On. The Temperature Indicator Light (9) will stop flashing when the coffee maker is ready.
6
When done, Turn the Steam Control (2) to Off BEFORE removing the Steam Wand (3) from the Milk.
4