71067 Rev2 29/10/07 15:24 Page 4
A |
B |
ò |
ñ
OPERATING THE
APPLIANCE
TOOLS AND
ACCESSORIES
1Fit the hose to the cleaner by inserting the hose end into the hose inlet Ú. When removing, squeeze the clips either side and pull.
2Attach the tube(s): either the 2 separate attachable tubes, or the single telescopic tube (dependant on model).
•For the telescopic tube, extend to the required length by pushing up the slider release and pulling out the tube A.
•The hose handle features an airflow regulator which allows suction to be reduced as required.
3Attach your choice of floor nozzle to the end of the tube ë.
Using the turbo nozzle
(certain models only)
Attach the turbo nozzle î to the telescopic tubes.
This nozzle is ideal for carpet and especially effective at removing pet hair.
Cleaning the turbo nozzle
The turbo nozzle should be regularly cleaned and any hairs or fibres wrapped around the brush bar removed to maintain optimum performance.
Hardfloor nozzle
(certain models only)
Attach the hardfloor nozzle í to the telescopic tubes. This nozzle is ideal for use on wood, laminate, tile and vinyl flooring.
Combination floor nozzle
The combination floor nozzle can be adjusted to suit different floor surfaces. Retract the brushes for use on carpet. The brushes should be down for use on hardfloors or damage may occur.
Hand tools
The crevice tool ò (for awkward places, behind radiators etc) and the upholstery nozzle
with clip on brush ñ (for curtains and upholstery) are stored in the tool drawer á B.
Hair and Stair tool
(certain models only)
This tool ï is suitable for cleaning the stairs, and when the additional attachment is added, it is ideal for picking up human and pet hair.
4 | For Advice, Spares or Accessories, tel: 0845 077 7700 (UK) or 1800 409 119 (Ireland) |
